Amaze Academy

SSC JE 2024 Notification Out: A Comprehensive Guide

SSC JE Notification Out: Important Dates and Exam Details

The Staff Selection Commission (SSC) has released the official notification for the Junior Engineer (Civil, Mechanical & Electrical) Examination, 2024. Here’s everything you need to know about the examination, important dates, eligibility criteria, and more.

Important Dates

  • Submission of Online Applications: 28-03-2024 to 18-04-2024
  • Last Date for Receipt of Online Applications: 18-04-2024 (23:00 hours)
  • Last Date for Online Fee Payment: 19-04-2024 (23:00 hours)
  • Window for Application Form Correction: 22-04-2024 to 23-04-2024 (23:00 hours)
  • Tentative Schedule of Computer-Based Examination (Paper-I): 04-06-2024 to 06-06-2024
  • Tentative Schedule of Computer-Based Examination (Paper-II): To be notified later

Eligibility Criteria

Here are the details of the posts and the essential educational qualifications:

  1. Border Roads Organization – JE: Degree in Civil Engineering or Three-Year Diploma in Civil Engineering with two years of working experience in Planning/ Execution/ Maintenance of Civil Engineering works. This post is for male candidates only. 
  2. Brahmaputra Board, Ministry of Jal Shakti – JE : Three-Year Diploma in Civil Engineering.
  3. Central Water Commission – JE : Bachelor’s Degree or Diploma in Civil Engineering.
  4. Central Public Works Department (CPWD) -JE : Bachelor’s Degree or Diploma in Civil Engineering.
  5. Central Water and Power Research Station -JE : Bachelor’s Degree or Diploma in Civil Engineering.
  6. Farakka Barrage Project, Ministry of Jal Shakti -JE : Bachelor’s Degree or Diploma in Civil Engineering. 
  7. Military Engineer Services (MES) – JE : Degree in Civil Engineering or Three years Diploma in Civil Engineering with two years’ experience in Planning, Execution and Maintenance of Civil Engineering works. 
  8. National Technical Research Organization (NTRO) -JE : Bachelor’s Degree or Diploma in Civil Engineering. 

The age limit for all the above posts is 30 years.

Vacancy

CPWD
CWC
BRO

Name of Department

Total Vacancy

Border Roads Organization (For Male candidates only)

438

Central Public Works Department

217

Central Water Commission

120

Military Engineer Services

To be notified

Farakka Barrage Project

2

Central Water and Power Research Station

3

National Technical Research Organization

3

Brahmaputra Board, Ministry of Jal Shakti 

2

Exam Structure

Let’s take a closer look at the exam structure and the topics covered in each paper:

Paper-I

  • The candidates will attempt the General Engineering part (Part-A, Part-B, or Part-C) based on their educational qualification, as chosen in the online application form.
    • Part-A (Civil & Structural): For candidates applying for the post of Junior Engineer (Civil).
    • Part-B (Electrical): For candidates applying for the post of Junior Engineer (Electrical).
    • Part-C (Mechanical): For candidates applying for the post of Junior Engineer (Mechanical).
  • The Paper-I will consist of Objective Type, Multiple Choice Questions (MCQs).
  • There will be 200 questions for a duration of 2 hours which totals to 200 marks.
  • Questions will be set in both Hindi and English.
  • Negative marking: One-third of the marks allotted to the question will be deducted for each wrong answer.

Paper-II

  • Paper-II is exclusively for candidates who have qualified Paper-I for Junior Engineer (JE) posts in the Civil, Electrical, or Mechanical disciplines.
  • It will also be an Objective Type, Multiple Choice Questions (MCQs) paper.
  • There will be 100 questions for a duration of 2 hours which totals to 300 marks
  • Candidates are allowed to bring their own Slide–Rule, Calculator, Logarithm Table, and Steam Table for Paper-II only. However, such aids are not allowed for Paper-I.
  • Like Paper-I, questions will be set in Hindi and English in all parts.
  • Negative marking: One-third of the marks allotted to the question will be deducted for each wrong answer.

 

Papers

Exam mode & Duration

Subject

Number of questions

Maximum marks

Paper I

(MCQ)

Computer based examination

2 hours

(i) General

Intelligence and

Reasoning

50

50

(ii) General Awareness

50

50

(iii) Part-A: General Engineering (Civil & Structural)

or

Part-B: General Engineering (Electrical)

or

Part-C: General Engineering (Mechanical)

100

100

Paper II

(MCQ)

Computer based examination

2 hours

Part-A: General

Engineering (Civil &

Structural)

or

Part-B: General

Engineering (Electrical)

or

Part-C: General

Engineering (Mechanical)

100

300

Normalization of Scores

In case the Computer Based Examination is conducted in multiple shifts, the scores of candidates will be normalized using a formula provided by the Commission. This normalization process ensures fairness and accuracy in determining the final merit and cut-off marks

Syllabus

PAPER – I

Subject

Topics

General Intelligence & Reasoning

·        Analogies

·        Similarities

·        Differences

·        Space Visualization

·        Problem Solving

·        Analysis

·        Judgment

·        Decision Making

·        Visual Memory

·        Discrimination

·        Observation

·        Relationship Concepts

·        Arithmetical Reasoning

·        Verbal And Figure Classification

·        Arithmetical Number

·        Abstract Ideas, Symbols and Their Relationships

·        Arithmetical Computations

·        Analytical Functions

General Awareness

·        Current Affairs

·        History

·        Culture

·        Geography

·        Economic Scene

·        General Polity

·        Scientific Research

Part-A (Civil Engineering)

·        Building Materials

·        Estimating

·        Costing and Valuation

·        Surveying

·        Soil Mechanics

·        Hydraulics

·        Irrigation Engineering

·        Transportation Engineering

·        Environmental Engineering

·        Structural Engineering

o   Theory of Structures

o   Concrete Technology

o   RCC Design

o   Steel Design

PAPER – II [Part-A (Civil & Structural Engineering)]

Building Materials

·        Physical And Chemical Properties

·        Classification

·        Standard Tests

·        Uses And Manufacture/Quarrying of Materials

·        Building Stones

·        Silicate Based Materials

·        Cement (Portland)

·        Asbestos Products

·        Timber and Wood Based Products

·        Laminates

·        Bituminous Materials

·        Paints

·        Varnishes

Estimating, Costing and Valuation

·        Estimate

·        Glossary Of Technical Terms

·        Analysis Of Rates

·        Methods And Unit of Measurement

·        Items Of Work – Earthwork, Brick Work (Modular & Traditional Bricks), RCC Work, Shuttering, Timber Work, Painting, Flooring, Plastering

·        Boundary Wall

·        Brick Building

·        Water Tank

·        Septic Tank

·        Bar Bending Schedule

·        Centre Line Method

·        Mid-Section Formula

·        Trapezoidal Formula

·        Simpson’s Rule

·        Cost Estimate of Septic Tank

·        Flexible Pavements

·        Tube Well

·        Isolated And Combined Footings

·        Steel Truss

·        Piles And Pile-Caps

·        Valuation – Value and Cost, Scrap Value, Salvage Value, Assessed Value, Sinking Fund, Depreciation and Obsolescence, Methods of Valuation.

Surveying

·        Principles Of Surveying

·        Measurement Of Distance

·        Chain Surveying

·        Working Of Prismatic Compass

·        Compass Traversing

·        Bearings

·        Local Attraction

·        Plane Table Surveying

·        Theodolite Traversing

·        Adjustment Of Theodolite

·        Levelling

·        Definition Of Terms Used in Levelling

·        Contouring

·        Curvature And Refraction Corrections

·        Temporary And Permanent

·        Adjustments Of Dumpy Level

·        Methods Of Contouring

·        Uses Of Contour Map

·        Tachometric Survey

·        Curve Setting

·        Earth Work Calculation

·        Advanced Surveying Equipments

Soil Mechanics

·        Origin Of Soil

·        Phase Diagram

·        Void Ratio

·        Porosity

·        Degree Of Saturation

·        Water Content

·        Specific Gravity of Soil Grains

·        Unit Weights

·        Density Index and Interrelationship Of Different Parameters

·        Grain Size Distribution Curves and Their Uses

·        Index Properties of Soils

·        Atterberg’s Limits

·        ISI Soil Classification

·        Plasticity Chart

·        Permeability Of Soil

·        Coefficient Of Permeability

·        Determination Of Coefficient of Permeability

·        Unconfined And Confined Aquifers

·        Effective Stress

·        Quick Sand

·        Consolidation Of Soils

·        Principles Of Consolidation

·        Degree Of Consolidation

·        Pre-Consolidation Pressure

·        Normally Consolidated Soil

·        E-Log P Curve

·        Computation Of Ultimate Settlement

·        Shear Strength of Soils

·        Direct Shear Test

·        Vane Shear Test

·        Triaxial Test Soil Compaction

·        Laboratory Compaction Test

·        Maximum Dry Density

·        Optimum Moisture Content

·        Earth Pressure Theories

·        Active And Passive Earth Pressures

·        Bearing Capacity of Soils

·        Plate Load Test

·        Standard Penetration Test

Hydraulics

·        Fluid Properties

·        Hydrostatics

·        Measurements Of Flow

·        Bernoulli’s Theorem and Its Application

·        Flow Through Pipes

·        Flow In Open Channels

·        Weirs

·        Flumes

·        Spillways

·        Pumps And Turbines

Irrigation Engineering

·        Definition

·        Necessity

·        Benefits

·        Ill Effects of Irrigation

·        Types And Methods of Irrigation

·        Hydrology – Measurement of Rainfall

·        Run Off Coefficient

·        Rain Gauge

·        Losses From Precipitation –

·        Water Requirement of Crops

·        Duty, Delta and Base Period

·        Kharif And Rabi Crops

·        Command Area

·        Time Factor

·        Crop Ratio

·        Overlap Allowance

·        Irrigation Efficiencies

·        Different Type of Canals

·        Types Of Canal Irrigation

·        Loss Of Water in Canals

·        Canal Lining

·        Types and Advantages Shallow and Deep Wells

·        Yield From a Well Weir and Barrage

·        Failure Of Weirs and Permeable Foundation

·        Slit And Scour

·        Kennedy’s Theory of Critical Velocity

·        Lacey’s Theory of Uniform Flow

·        Definition Of Flood, Causes and Effects, Methods of Flood Control,

·        Water Logging

·        Preventive Measure Land Reclamation

·        Characteristics Of Affecting

·        Fertility Of Soils

·        Purposes, Methods, Description of Land and Reclamation Processes

·        Major Irrigation Projects in India

Transportation Engineering

·        Highway Engineering – cross sectional elements, geometric design, types of pavements

·        pavement materials – aggregates and bitumen, different tests

·        Design of flexible and rigid

·        Pavements

·        Water Bound Macadam (WBM) and Wet Mix Macadam (WMM)

·        Gravel Road

·        Bituminous construction

·        Rigid pavement joint

·        pavement maintenance

·        Highway drainage

·        Railway Engineering – Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards

·        Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety

Environmental Engineering

·        Quality of water

·        source of water supply

·        purification of water

·        distribution of water

·        need of sanitation

·        sewerage systems

·        circular sewer

·        oval sewer

·        sewer appurtenances

·        sewage treatments

·        Surface water drainage

·        Solid waste management – types, effects, engineered management system

·        Air pollution – pollutants, causes, effects, control

·        Noise pollution – cause, health effects, control

Structural Engineering

·        Elasticity Constants

·        Types Of Beams – Determinate and Indeterminate

·        Bending Moment and Shear Force Diagrams of Simply Supported, Cantilever and Over Hanging Beam

·        Moment Of Area and Moment of Inertia for Rectangular & Circular Sections

·        Bending Moment and Shear Stress for Tee, Channel and Compound Sections

·        Chimneys

·        Dams

·        Retaining Walls

·        Eccentric Loads

·        Slope & Deflection of Simply Supported and Cantilever Beams

·        Critical Load

·        Columns

·        Torsion Of Circular Section

Concrete Technology

·        Properties, Advantages and uses of concrete, cement, aggregates

·        importance of water quality

·        water cement ratio,

·        workability

·        mix design

·        storage, batching, mixing, placement

·        compaction

·        finishing and curing of concrete

·        quality control of concrete

·        hot weather and cold weather concreting

·        repair and maintenance of concrete structures

RCC Design

·        RCC Beams-Flexural Strength, Shear Strength, Bond Strength

·        Design Of Singly Reinforced and Doubly Reinforced Beams,

·        Cantilever Beams T-Beams

·        Lintels

·        One Way and Two-Way Slabs

·        Isolated Footings

·        Reinforced Brick Works

·        Columns

·        Staircases

·        Retaining Wall

·        Water Tanks (RCC Design Questions May Be Based on Both Limit State and Working Stress Methods)

Steel Design

·        Steel Design

·        Construction Of Steel Columns

·        Beams

·        Roof Trusses

·        Plate Girders

Nationality/Citizenship

A candidate must be either:

(a) a citizen of India, or

(b) a subject of Nepal, or

(c) a subject of Bhutan, or

(d) a person of Indian origin who has migrated from Pakistan, Burma, Sri Lanka, East African countries of Kenya, Uganda, the United Republic of Tanzania (formerly Tanganyika and Zanzibar), Zambia, Malawi, Zaire, Ethiopia and Vietnam with the intention of permanently setting in India.

Application Process

Candidates who wish to apply in response to this Notice and have not generated their One-Time Registration (OTR) on the new website (https://ssc.gov.in) will be required to do so as the earlier OTR generated on the old website (https://ssc.nic.in) will not be functional for the new website. Subsequent to OTR, the candidates can proceed to fill the application for the examination. Once an OTR has been generated on the new website, it will continue to remain valid for all the examinations to be applied for on the new website.

Fee Details

The fee payable is Rs 100/- (Rs one hundred only). Women candidates and candidates belonging to Scheduled Castes (SC), Scheduled Tribes (ST), Persons with Benchmark Disabilities (PwBD) and Ex-Servicemen eligible for reservation are exempted from payment of fee.

Examination Centres

The centres of examination in Karnataka, Kerala Region(KKR)/ Karnataka, Kerala and Lakshadweep 

  • Belagavi (9002)
  • Bengaluru (9001)
  • Hubballi (9011)
  • Kalaburagi (Gulbarga)(9005)
  • Mangaluru (9008)
  • Mysuru (9009)
  • Shivamogga (9010)
  • Udupi (9012)
  • Ernakulam (9213)
  • Kollam (9210)
  • Kottayam (9205)
  • Kozhikode (9206)
  • Thiruvananthapuram (9211).

Conclusion

The release of the SSC JE notification is an excellent opportunity for engineering graduates to secure a prestigious government job. Aspiring candidates must note the important dates and adhere to the application process. Adequate preparation according to the syllabus is crucial for success in the Computer Based Examination. With dedication and hard work, candidates can excel in the exam and take a step closer to a promising career as  Junior Engineer in various government departments. Good luck to all the aspirants!

Amaze Academy offers JE Diamond batch for the Junior engineer exam preparation right from the base. Offering both technical and non tech subjects, JE Diamond batch is your best choice to secure top rank in the SSC and RRB Junior exams.

Leave a Reply

Your email address will not be published. Required fields are marked *